Your Family Will Thank You For Getting This Door Handle Replacement
Door Handle Replacement
Door handles seem like something minor, but if you dislike the appearance of the handles or are finding them difficult to use, it's worth replacing them. Installing a new door handle is simple if you've got patience.
Modern door handles are usually equipped with cover plates that hide the screws to give them an attractive appearance. However, you'll have to attach them separately if the new handle doesn't have them attached already.
Take off the handle from the old one.
Door handles are not only essential for aesthetics of your home but they're also vital for safety since they let you lock and unlock your door. But, over time, your door handle may lose its grip, become loose, or look old and worn. This is an indication that it's time for a replacement.
One of the first signs that your door handle requires replacing is if it's becoming difficult to operate. This is an issue because it means that you are unable to no longer lock or unlock your door which could pose an security risk to you and your family.
It is also recommended to replace your door handle if it is damaged or broken. A broken door handle can be extremely dangerous, particularly if your children or elderly family members are unable to open it and could get trapped within. It's simple to fix a damaged handle on the door.
Most modern door handles are standard size and therefore should fit any door. If you're not sure if the new door handle you are buying will work, remove the old one and take measurements of its holes in the housing. This will allow you to buy the right size door handle.
It is the easiest method to remove the old door handle by taking it off from the door. This is usually done using a screw driver. However some door handles have a cover plate that conceals the screws that mount them, so you'll need to pry off this cover plate to get access to the screws beneath. After you have removed the old handle, make a note of how the spindle has been connected. This will aid in aligning the new handle.
You can also remove the door handle by removing the latch mechanism. This is usually done with the screwdriver, but you'll need to locate the small latch, which is located on the edge of the trim piece. After you have removed the latch, remove the handle from the strike plate, and then remove the latch from the door edge.
Take off the Strike Plate
If you are replacing your handle, you'll be required to replace the latch plate that holds the hole which the door's latch hooks into when it closes. The new handles will have two latch plates that are circular and rectangular plate (see the image above which illustrates the components of the door handle). If you have a rectangular latch plate, you can replace it with a round one. This will allow the latch to hook into the strike plate, making the handle more convenient.
The first step is to unhook the screw that is holding the old latch plate. The screws are typically tight and require a fair amount of force to loosen them. If possible, it may be helpful to have another person assist you with this task.
The latch plate should easily lift itself out of the door once the screws have been removed. If the latch plate is stuck or doesn't move use a small file to scrape the edges. This can help loosen the plate.
You can now move on to preparing the new door strike plate for installation. Screw the latch plate into the door jamb using the screws that came with your new handles. Be cautious not to tighten too much the screws, as this could damage the strike plate.
If you're not sure whether the latch plate is in the proper position, try closing and then opening the door to determine whether it latches and closes correctly. If not, you will need to adjust the strikeplate either up or down, forward or back until the door closes properly.
If the door still moves or jiggles, you might have to expand your latch hole on the strike plate. This is more frequent in older doors, however it can happen due to wear and tear, hinge mortises that are too shallow or not the right size for the latch, or from a broken or damaged strike plate that is damaged or broken. If this is the case, follow the same procedure for adjusting the strike plate, but using an iron file instead of a chisel and hammer.
Removal of the Latch
The latch is the angled metal piece that slides between the hole that runs along the inside edge of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also hooks in a hole on the door's frame so that the door stays closed. If your door shakes when you close it, replacing the latch could be all that's needed to correct the issue.
The screws that secure the door latch are difficult to locate, but you can usually insert a screwdriver into a small hole in the trim plate and pry the latch off. Once you've removed the trim plate, it should be simple to take off the latch as well as the bolts that keep the latch and spindle in place.
If the latch isn't easily removed then use a paperclip tool to remove it from the handle mechanism. Insert the item in the recessed latch slot and gently twist it or jiggle until you feel that the latch and handle are beginning to separate. You may need repeat this process a few times before you are able to take the latch off.
After the old latch has been removed, you should be able to slide the new latch into the slot without problems. Make sure that the latch is correctly positioned in the slot and is aligned with the screw chambers, and then use the new screws to attach it to the strike plate and door frame.
Measure luton door handle replacement existing backset (the distance between the centre of the large hole in the front of the door and the edge) prior to installing the new handle. Make sure that the size of the latch of the new handle is equal to the measurement.
If you are replacing the latch or handle or handle, or if the old lock cylinder is damaged, then you'll require a new one. If you're not replacing the locks the new latch should fit in the existing recess and work with the keys you have currently. Choose a latch that has rectangular cover plates that match your old handles.
Then remove the Cover Plate
Door handles can begin to look shabby over time However, if you replace them with a modern lever on rose design it's a simple and quick DIY project to decorate and will enhance the overall appearance of your home. You can purchase complete sets that include the appropriate escutcheons and privacy adjustor kits.
The first step to replace the door handle inside is to remove the cover plate or rose, which covers the screws and inner mechanism. Use a flathead to remove the cover plate. It could have a slot on one edge or be held by pins.
Remove the screw holding the handle inside and set it aside once the cover plate is removed. Take off the screws that hold both the inner and outer plates. You can loosen them by using the help of a Philips Screwdriver. Then, you can remove the outer plates and latch plate from the door and set them aside.
Most doors have an opening between the jamb of the door and the inside edge of the frame that makes room for a handle, but not all do. If yours doesn't, you will need to drill a hole into the door. The process for doing this is similar to the procedure for opening a door with the lock, however you'll need to take extra care not to damage the frame or door.
The installation of new door knob screws is necessary after the holes have been drilled. Choose the same size as the old screws to ensure that you don't get a handle that is too loose or tight. Installing a new strike rod and latch is also mandatory. These aren't included in all door handle sets.
Amazon's Choice FAERSI 2-piece chrome finish handle sets are an excellent choice if you're in the market of a high-quality interior door handle replacement set. It's a factory-fit and has received a plethora of five-star reviews from satisfied customers. It's an excellent choice to replace damaged or worn door handle hardware inside your Chevy HHR.